December 6, 2024

Architectural Concepts Guide

Elevating Home Design Standards

A megaton-scale industrial demonstration study on hydrothermal mineralization enabled silty waste upcycling

A megaton-scale industrial demonstration study on hydrothermal mineralization enabled silty waste upcycling
  • Zhan, L. T. et al. Discussion on the Approaches of Disposal and Resource Utilization of the Waste Soils from Urban Construction: A Case Study of Wenzhou. Environ. Sanit. Eng. 29, 1–9 (2021).

    Google Scholar 

  • Chen, R. et al. Quantitative methods for predicting underground construction waste considering reuse and recycling. Environ. Sci. Pollut. Res. 29, 3394–3405 (2022).

    Article 

    Google Scholar 

  • Ding, Z., Liu, T., Zhang, Y., Su, X. & Zheng, J. The curing and strength properties of highly moist waste mud from slurry shield tunnel construction. Appl. Sci. 12, 3762 (2022).

    Article 
    CAS 

    Google Scholar 

  • Wang, L. et al. Recycling dredged sediment into fill materials, partition blocks, and paving blocks: Technical and economic assessment. J. Clean. Prod. 199, 69–76 (2018).

    Article 
    CAS 

    Google Scholar 

  • Zhou, Y. F., Cai, G. H., Cheeseman, C., Li, J. S. & Poon, C. S. Sewage sludge ash-incorporated stabilisation/solidification for recycling and remediation of marine sediments. J. Environ. Manag. 301, 113877 (2022).

    Article 
    CAS 

    Google Scholar 

  • Wang, Q. M., Li, J. S., Xue, Q. & Poon, C. S. Immobilization and recycling of contaminated marine sediments in cement-based materials incorporating iron-biochar composites. J. Hazard. Mater. 435, 128971 (2022).

    Article 
    CAS 
    PubMed 

    Google Scholar 

  • Jike, N. et al. Pervious concrete with secondarily recycled low-quality brick-concrete demolition residue: engineering performances, multi-scale/phase structure and sustainability. J. Clean. Prod. 341, 130929 (2022).

    Article 
    CAS 

    Google Scholar 

  • Liu, J., Han, X., Pan, Y., Cui, K. & Xiao, Q. H. Physics-assisted machine learning methods for predicting the splitting tensile strength of recycled aggregate concrete. Sci. Rep. 13, 9078 (2023).

    Article 
    CAS 
    PubMed 
    PubMed Central 

    Google Scholar 

  • Zhang, M. Y., Liu, X. L. & Kong, L. J. Evaluation of carbon and economic benefits of producing recycled aggregates from construction and demolition waste. J. Clean. Prod. 425, 138946 (2023).

    Article 

    Google Scholar 

  • Fayed, S., Mansour, W. & Tawfik, T. A. Bearing behavior of steel fiber reinforced recycled aggregate concrete blocks. Structures 57, 105249 (2023).

    Article 

    Google Scholar 

  • Wang, B., Yan, L., Fu, Q. & Kasal, B. A comprehensive review on recycled aggregate and recycled aggregate concrete. Resour. Conserv. Recy. 171, 105565 (2021).

    Article 
    CAS 

    Google Scholar 

  • Wu, J. D., Guo, L. P. & Qin, Y. Y. Preparation and characterization of ultra-high strength and ultra-high-ductility cementitious composites incorporating waste clay brick powder. J. Clean. Prod. 312, 127813 (2021).

    Article 

    Google Scholar 

  • Tan, J. W., Cizer, O., Vlieger, J. D., Dan, H. C. & Li, J. B. Impacts of milling duration on construction and demolition waste (CDW) based precursor and resulting geopolymer: Reactivity, geopolymerization and sustainability. Resour. Conserv. Recy. 184, 106433 (2022).

    Article 
    CAS 

    Google Scholar 

  • Zeng, Q. et al. Total recycling of low-quality urban-fringe construction and demolition waste towards the development of sustainable cement-free pervious concrete: The proof of concept. J. Clean. Prod. 352, 131464 (2022).

    Article 
    CAS 

    Google Scholar 

  • Zorluer, I. & Cavus, U. S. Fuzzy logic assessment of engineering properties of granular soil with wastes for environment protection and road base use. Case. Stud. Constr. Mater. 15, e00774 (2021).

    Google Scholar 

  • Ali, H. A. et al. Valorization of fine recycled C&D aggregate and incinerator bottom ash for the preparation of controlled low-strength material (CLSM). Clean. Waste. Syst. 3, 100061 (2022).

    Article 

    Google Scholar 

  • Huang, B. J. et al. Construction and demolition waste management in China through the 3R principle. Resour. Conserv. Recy. 129, 36–44 (2018).

    Article 

    Google Scholar 

  • Tam, V. W. Y., Soomro, M. & Evangelista, A. C. J. A review of recycled aggregate in concrete applications (2000–2017). Constr. Build Mater. 172, 272–292 (2018).

    Article 
    CAS 

    Google Scholar 

  • Cheng, J. X., Shao, Z. S., Xu, T., Liang, D. & Wei, W. The advantages of microwave in using engineering spoil to sinter bricks. J. Build. Eng. 57, 104940 (2022).

    Article 

    Google Scholar 

  • Li, H., Zhang, J., Zheng, W., Cui, T. & Yang, Y. Study on the properties and process parameters of different clays in disc granulation. Materials 13, 1714 (2020).

    Article 
    CAS 
    PubMed 
    PubMed Central 

    Google Scholar 

  • Wang, C. H. et al. Ceramsite production using water treatment residue as main ingredient: The key affecting factors identification. J. Environ. Manag. 308, 114611 (2022).

    Article 
    CAS 

    Google Scholar 

  • Cui, Y., Pan, F., Zhang, B., Wang, X. & Diao, H. Laboratory test of waste mud treated by the flocculation-vacuum-curing integrated method. Construct. Build. Mater. 328, 127086 (2022).

    Article 
    CAS 

    Google Scholar 

  • Ishida, H. Soil-ceramics (Earth) self-adjustment of humidity and temperature. In Encyclopedia of smart materials (ed. Schwartz, M.) 1014–1029 (Elsevier, Amsterdam, 2002).

  • Niyomukiza, J. B., Nabitaka, K. C., Kiwanuka, M., Tiboti, P. & Akampulira, I. Enhancing Properties of Unfired Clay Bricks Using Palm Fronds and Palm Seeds. Results. Eng. 16, 100632 (2022).

    Article 

    Google Scholar 

  • Luo, C., Qiang, W. & Lee, H. F. Does the low-carbon city pilot policy work in China? A company-level analysis based on the PSM-DID model. J. Environ. Manag. 337, 117725 (2023).

    Article 

    Google Scholar 

  • Zeng, S. B., Jin, G., Tan, K. Y. & Liu, X. Can low-carbon city construction reduce carbon intensity? Empirical evidence from low-carbon city pilot policy in China. J. Environ. Manag. 332, 117363 (2023).

    Article 

    Google Scholar 

  • Shi, Q. et al. Co-benefits of CO2 emission reduction from China’s clean air actions between 2013-2020. Nat. Commun. 13, 5061 (2022).

    Article 
    CAS 
    PubMed 
    PubMed Central 

    Google Scholar 

  • Alonzo, S. M. M., Bentley, J., Desai, S. & Bastakoti, B. P. Hydrothermal synthesis of hierarchical microstructure tungsten oxide/carbon nanocomposite for supercapacitor application. Sci. Rep. 13, 21732 (2023).

    Article 
    CAS 
    PubMed 
    PubMed Central 

    Google Scholar 

  • Yang, G. & Park, S. J. Conventional and Microwave Hydrothermal Synthesis and Application of Functional Materials: A Review. Materials 12, 1177 (2019).

    Article 
    CAS 
    PubMed 
    PubMed Central 

    Google Scholar 

  • Yu, S. et al. Decoupled temperature and pressure hydrothermal synthesis of carbon sub-micron spheres from cellulose. Nat. Commun. 13, 3616 (2022).

    Article 
    CAS 
    PubMed 
    PubMed Central 

    Google Scholar 

  • Lan, H. R., Zhang, Y. F., Cheng, M. Z., Li, Y. & Jing, Z. Z. An intelligent humidity regulation material hydrothermally synthesized from ceramic waste. J. Build. Eng. 40, 102336 (2021).

    Article 

    Google Scholar 

  • Takei, T. et al. Preparation of porous material from waste bottle glass by hydrothermal treatment. Ceram. Int. 38, 2153–2157 (2012).

    Article 
    CAS 

    Google Scholar 

  • Reka, A. A., Pavlovski, B. & Makreski, P. New optimized method for low-temperature hydrothermal production of porous ceramics using diatomaceous earth. Ceram. Int. 43, 12572–12578 (2017).

    Article 
    CAS 

    Google Scholar 

  • Gougazeh, M. & Buhl, J. C. Synthesis and characterization of zeolite A by hydrothermal transformation of natural Jordanian kaolin. J. Assoc. Arab. Uni. Basic. Appl. Sci. 15, 35–42 (2014).

    Google Scholar 

  • Tauanov, Z., Shah, D., Inglezakis, V. & Jamwal, P. K. Hydrothermal synthesis of zeolite production from coal fly ash: A heuristic approach and its optimization for system identification of conversion. J. Clean. Prod. 182, 616–623 (2018).

    Article 
    CAS 

    Google Scholar 

  • Zhang, Y. F. et al. Hydrothermal solidification of underground construction wastes into building materials: Waste slurry recycling, industrial application and evaluation. J. Clean. Prod. 423, 139091 (2023).

    Article 

    Google Scholar 

  • Sugama, T. & Pyatina, T. Self-healing, re-adhering, and carbon-steel corrosion mitigating properties of fly ash-containing calcium aluminum phosphate cement composite at 300°C hydrothermal temperature. Cement Concrete Comp. 99, 1–16 (2019).

    Article 
    CAS 

    Google Scholar 

  • Sugama, T. & Pyatina, T. Self-re-adhering alkali-activated cement composite and its ability to mitigate corrosion of carbon steel in 300 °C hydrothermal environment. Geothermics 96, 102068 (2021).

    Article 

    Google Scholar 

  • Yuan, R. R. et al. Facile treatment of municipal solid waste incineration fly ash by one-step microwave hydrothermal method: Hazards detoxification and tobermorite synthesis. J. Environ. Chem. Eng. 11, 109768 (2023).

    Article 
    CAS 

    Google Scholar 

  • Hartmann, A., Khakhutov, M. & Buhl, J. C. Hydrothermal synthesis of CSH-phases (tobermorite) under influence of Ca-formate. Mater. Res. Bull. 51, 389–396 (2014).

    Article 
    CAS 

    Google Scholar 

  • Liu, S., Han, C. & Liu, J. Study of K-Feldspar and lime hydrothermal reaction: Phase and mechanism with reaction temperature and increasing Ca/Si ratio. Minerals 9, 46 (2019).

    Article 

    Google Scholar 

  • Galvánková, L., Másilko, J., Solný, T. & Štěpánková, E. Tobermorite Synthesis Under Hydrothermal Conditions. Proc. Eng. 151, 100–107 (2016).

    Article 

    Google Scholar 

  • Zou, J., Guo, C., Jiang, Y., Wei, C. & Li, F. Structure, morphology and mechanism research on synthesizing xonotlite fiber from acid-extracting residues of coal fly ash and carbide slag. Mater. Chem. Phys. 172, 121–128 (2016).

    Article 
    CAS 

    Google Scholar 

  • Fang, Y. et al. The state of Fe3+ in the C-F-A-S-H system with varying Fe/Si and Ca/Si ratios. J. Mater. Chem. A. 11, 26193–26211 (2023).

    Article 
    CAS 

    Google Scholar 

  • Zhu, W. H. et al. Hydrothermal synthesis of a novel ecological revetment material by sediment mixed with biochar. J. Clean. Prod. 326, 129380 (2021).

    Article 
    CAS 

    Google Scholar 

  • Oh, D., Noguchi, T., Kitagaki, R. & Choi, H. Proposal of demolished concrete recycling system based on performance evaluation of inorganic building materials manufactured from waste concrete powder. Renew. Sust. Energ. Rev. 135, 110147 (2021).

    Article 
    CAS 

    Google Scholar 

  • Rungchet, A., Chindaprasirt, P., Wansom, S. & Pimraksa, K. Hydrothermal synthesis of calcium sulfoaluminate-belite cement from industrial waste materials. J. Clean. Prod. 115, 273–283 (2016).

    Article 
    CAS 

    Google Scholar 

  • Yang, W. et al. Coupled microwave hydrothermal dechlorination and geopolymer preparation for the solidification/ stabilization of heavy metals and chlorine in municipal solid waste incineration fly ash. Sci. Total Environ. 853, 158563 (2022).

    Article 
    CAS 
    PubMed 

    Google Scholar 

  • Liu, J. K., Li, Y. X. & Wang, Z. S. The potential for carbon reduction in construction waste sorting: A dynamic simulation. Energy 275, 127477 (2023).

    Article 
    CAS 

    Google Scholar 

  • Zhang, Z. G., Gao, Y. F., Qin, F. J., Sun, F. & Huang, Y. B. Mechanical properties of sustainable high strength ECC with substitution of cement by limestone powder. Case. Stud. Constr. Mat. 19, e02434 (2023).

    Google Scholar 

  • Miao, J. J., Jing, Z. Z., Pu, L. & Zhang, Y. Synthesis of a novel humidity self-regulating material from riverbed sediment for simulating cave dwellings performance. J. Build. Eng. 20, 15–20 (2018).

    Article 

    Google Scholar 

  • Meller, N., Hall, C. & Phipps, J. S. A new phase diagram for the CaO-Al2O3-SiO2-H2O hydroceramic system at 200 °C. Mater. Res. Bull. 40, 715–723 (2005).

    Article 
    CAS 

    Google Scholar 

  • Chen, G., Lin, M. G., Chen, Y. H., Kong, G. Q. & Geng, Z. Z. Alkali-reinforced hydrothermal solidification of waste soil. Mater. Chem. Phys. 289, 126505 (2022).

    Article 
    CAS 

    Google Scholar 

  • General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. GB/T 4472–2011, Detemination of Density and Relative Density for Chemical Products (Standards Press of China, 2011).

  • General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. GB/T 2542–2012, Test Methods for Wall Bricks (Standards Press of China, 2012).

  • ASTM International. ASTM C20, Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water (ASTM International, 2000).

  • General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. GB 5101-2003, Fired Common Bricks (Standards Press of China, 2003).

  • Adazabra, A. N., Viruthagiri, G., Sulemana, S. A. & Yirijor, J. Valorising cassava pomace biosolid in fired clay bricks production: Physical, mechanical and thermal evaluation. Mater. Chem. Phys. 309, 128402 (2023).

    Article 
    CAS 

    Google Scholar 

  • Arslan, C., Gencel, O., Borazan, I., Sutcu, M. & Erdogmus, E. Effect of waste-based micro cellulose fiber as pore maker on characteristics of fired clay bricks. Constr. Build. Mater. 300, 124298 (2021).

    Article 
    CAS 

    Google Scholar 

  • Atan, E., Sutcu, M. & Cam, A. S. Combined effects of bayer process bauxite waste (red mud) and agricultural waste on technological properties of fired clay bricks. J. Build. Eng. 43, 103194 (2021).

    Article 

    Google Scholar 

  • Benahsina, A., Haloui, Y. E., Taha, T., Elomari, M. & Bennouna, M. A. Substitution of natural clay by Moroccan solid mining wastes to manufacture fired bricks. Mater. Today Proc. 58, 1324–1330 (2022).

    Article 
    CAS 

    Google Scholar 

  • Erdogmus, E., Harja, M., Gencel, O., Sutcu, M. & Yaras, A. New construction materials synthesized from water treatment sludge and fired clay brick wastes. J. Build. Eng. 42, 102471 (2021).

    Article 

    Google Scholar 

  • Gencel, O., Erdugmus, E., Sutcu, M. & Oren, O. H. Effects of concrete waste on characteristics of structural fired clay bricks. Constr. Build. Mater. 255, 119362 (2020).

    Article 

    Google Scholar 

  • Munoz, P., Letelier, V., Bustamante, M. A., Marcos-Ortega, J. & Sepúlveda, J. G. Assessment of mechanical, thermal, mineral and physical properties of fired clay brick made by mixing kaolinitic red clay and paper pulp residues. Appl. Clay. Sci. 198, 105847 (2020).

    Article 
    CAS 

    Google Scholar 

  • Biagioni, C., Bonaccorsi, E., Lezzerini, M. & Merlino, S. Thermal behaviour of Al-rich tobermorite. Eur. J. Mineral. 28, 23–32 (2016).

    Article 
    CAS 

    Google Scholar 

  • Morandeau, A., Thiéry, M. & Dangla, P. Investigation of the carbonation mechanism of CH and C-S-H in terms of kinetics, microstructure changes and moisture properties. Cem. Concr. Res. 56, 153–170 (2014).

    Article 
    CAS 

    Google Scholar 

  • Ma, W. P. et al. Carbon emission free preparation of calcium hydroxide with calcium carbide slag (CCS) through micro-bubble impurities removal. J. Clean. Prod. 423, 138669 (2023).

    Article 
    CAS 

    Google Scholar 

  • Ministry of Housing and Urban Rural Development of the People’s Republic of China. GB/T 51366-2019, Standard for Building Carbon Emission Calculation (Standards Press of China, 2019).

  • Mutisya, S. M. & Miranda, C. R. The surface stability and morphology of tobermorite 11Å from first principles. Appl. Surf. Sci. 444, 287–292 (2018).

    Article 
    CAS 

    Google Scholar 

  • Liu, J. K., Chen, Y. X. & Wang, X. T. Factors driving waste sorting in construction projects in China. J. Clean. Prod. 336, 130397 (2022).

    Article 

    Google Scholar 

  • Liu, J. K. & Li, J. Y. Economic benefit analysis of the carbon potential of construction waste resource management based on a simulation of carbon trading policy. Environ. Sci. Pollut. Res. 30, 85986–86009 (2023).

    Article 

    Google Scholar 

  • Zeng, Q., Wang, X. H., Yang, P. C., Wang, J. Y. & Zhou, C. S. Tracing mercury entrapment in porous cement paste after mercury intrusion test by X-ray computed tomography and implications for pore structure characterization. Mater. Charact. 151, 203–215 (2019).

    Article 
    CAS 

    Google Scholar 

  • General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. GB/T 32150-2015, General Guideline of the Greenhouse Gas Emissions Accounting and Reporting for Industrial Enterprises (Standards Press of China, 2015).

  • General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. GB/T 32151.8-2015, Requirements of the Greenhouse Gas Emission Accounting and Reporting-Part 8: Cement enterprise (Standards Press of China, 2015).

  • General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. GB/T 21144-2007, Solid Concrete Brick (Standards Press of China, 2007).

  • Ministry of Industry and Information Technology of the People’s Republic of China. JC/T 239-2014, Autoclaved Fly Ash Brick (Ministry of Industry and Information Technology of the People’s Republic of China, 2014).

  • General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. GB/T 13545-2014, Fired Hollow Bricks and Blocks (Standards Press of China, 2014).

  • link

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Copyright © All rights reserved. | Newsphere by AF themes.